According to Minviro, most published LCA studies for graphite production do not sufficiently represent the sizable contribution of different electricity scenarios to the overall impact of operations.
“Producing anode grade graphite for lithium-ion batteries (LIBs) is energy-intensive. Existing graphite supply chains often situate energy-demanding process stages in regions with low-cost energy, such asInner Mongoliawhere the grid is dominated by coal and therefore has a high climate change impact per kWh,” the report reads.
In the firm’s view, calculating the climate change impacts of graphite production has become relevant asEV sales soar worldwide, as around 96% of all anodes in LIBs contain natural and/or synthetic graphite as their primary material with each LIB requiring 10-15 times more graphite than lithium.
“Around 75,000 tonnes of graphite is required to create 1 million EVs, meaning that 900,000 tonnes will be required to meet the 12 million EVs that will be produced by 2025,” the document states.
But research has shown thatnatural graphite miningcan cause dust emissions, and the purification of battery-grade anode products requires high quantities of reagents such as sodium hydroxide and hydrofluoric acid, which may be harmful to both human health and the environment.
Synthetic graphite production, on the other hand, is more energy-intensive, which has led operators to seek the cheapest power sources that tend to be coal dominant, generating a higher overall carbon footprint.
The actual numbers
Knowing the theory, Minviro’s experts conducted new life cycle impact assessments on data from natural and synthetic graphite anode producers in high-impact coal-based grid mix regions from existing supply chains.
The results were compared to representative academic natural and synthetic graphite values and the current best-fit data entry from a commercial LCA database for mixed natural/synthetic battery-grade graphite products.
The firm’s experts found that the calculated global warming potential (GWP) values for producing 1 kilogram of anode grade graphite in coal-based grid mixes, like Inner Mongolia, are ~800% and ~1,000% higher than the commercial database value for natural and synthetic routes, respectively.
Graph courtesy of Minviro.They also noticed that mining, particularly open-pit, contributes less CO2 impact per kilogram of battery-grade graphite product compared to subsequent production stages, with the purification process taking the lion’s share of the energy consumed and, thus, the environmental impacts associated with natural anode-grade graphite production.
When it comes to synthetic graphite, most of the impacts are the result of the vast energy consumption during graphitization and roasting processes, in addition to embodied impacts associated with calcined petroleum coke production, which is the synthetic graphite feedstock.
Yet, the CO2 impacts of synthetics vary depending on the grid mix, whereas a larger proportion of natural impacts can come from reagent and fuel use.
“This study clearly highlights that the values for GWP in the specified production routes for the existing graphite anode supply chain are much higher than previously published and assumed values from LCA databases and academic studies, underscoring the importance of accurate grid mix definition in final impact assessments,” the paper reads.
“Both natural and synthetic graphite anode routes have huge energy considerations for different aspects of the production chain. With all other inputs identical, the localized environmental impact of electricity generation can cause significant variation between individual operations as a result.”
Trade-offs
For Minviro, this state of affairs in which most of the global supply of graphite is produced in high-impact grid regions creates a challenging economic-environmental trade-off because even though battery-grade graphite producers benefit from operating in low-cost, fossil-dominated areas, their product will inevitably generate the highest environmental impacts which may not be acceptable for LIBs or EV customers.
Thus, the London-based consultancy presents the idea of switching production to regions with dominant renewable energy sources to reduce GWP related to electricity use, particularly for synthetic graphite.
“There are significant opportunities to reduce the environmental impact of anode production by utilizing low-carbon or renewable energy sources, exploring new production routes, minimizing waste products or identifying new material or reagent suppliers,” the report states.
“Whilst companies strive for the cheapest production route, environmental standards especially relating to climate change will place value on low-impact materials and have tangible economic impacts in the coming years.”