Australia's largest stock trading and investment forum Australia's #1 stock forum

AVZ

Click for more information

0.00%

78.0¢ avz minerals limited

Love your work

First 1567 Last

Share
Profile

Follow
sentinel1221

1,075 Posts.

406

04/09/23

08:49

Post #: 69713537
Share

Originally posted by Scarpa: ↑

Some updates - thought I would update this thread since I last posted here back in Feb (see post above).

Have posted in other threads elsewhere so thought may as well bring some of those posts where talk supply/demand back to this thread I started eons ago. I prefer to keep this thread as a general understanding demand and supply thread meaning leave the other discussions in other threads. Essentially this post is just a duplication of posts I have done elsewhere.

1. Understanding grade - why choose DMS only, DMS/Floatation or just WOF:

CXO is a DMS only operation and its issue is the recovery rate by and large which is less than 50%. The problem with CXO is that it has mis-forecast the mix of fines verses coarse spodumene and it is coarse spodumene that is a key to a DMS process and recovery rates. From CXO's latest quarterly, and obviously we know what happened after that which I feel for investors there:

A solution of specific gravity at 2 .9 works best, from those companies who have documented fully their METs works, to sink the spodumene and float the rest. A number of the deleterious elements have specific gravity less than 2.8 so need too ensure the solution has SG above that, but not significantly above that that does not sink spodumene (which has a specific gravity of above 3).

In the DMS process you crush and grind the specimens to the appropriate particle sizes you are seeking to the separate in the HLS solution. If you can’t liberate the spodumene appropriately then you are left with needing a floatation option to meet specs. And if can't liberate then the sink/float of HLS doesn't work appropriately.

For those interested a while ago I posted around the reasons why companies may chose various processes for producing spodumene concentrate (WOF/DMS/DMS-floatation). From this post I go through the choice process - Post #: 54283727 Essentially, the choice between Whole of Floatation and DMS/floatation becomes one of i.) cost and/or product quality especially if wanting a higher grade product and/or ii.) what markets you are intending to target (Chemical Grade or Technical Grade or both CG and TG like Greenbushes does) and/or iii.) whether spodumene can easily be liberated from the lattice at the DMS stage.

But if you are seeking to produce product above say 6.5% Li20 you certainly are only going to be relying on WOF btw. Greenbushes itself has installed floatation units and produces some product types well above 6.5% Li20. But again grade is also king in been able to do this IMO.

Coarseness of spodumene, crystal size and how easily spodumene is removed from the lattice, is the key to DMS and if impurities are there and cannot be separated, because they cannot be separated in the DMS stage if the impurities are in the lattice of the spodumene itself btw, well floatation then becomes the only option btw, not grade been the decider as many are assuming btw. It has nothing to do with ore grade - it is about liberation. Difference is one is coarse product (DMS) and the other is fine spodumene concentrate (WOF). It makes no difference to the initial 1080 degrees roasting aspect of the subsequent process in producing LCE btw in your downstream converters."

What also helps recovery rates is grade of resource and low deleterious elements. The higher the grade the less tonnes required to get to 6% grade spodumene, and the lower deleterious elements in the resource the less cost to remove them to achieve spodumene concentrate specifications - refer Post #: 67888140

Example 1:
Li20 ore grade 1% - you will need to treat at 7.5 tonnes of ore, assuming an 80% recovery rate , to potentially get to 6% concentrate. But if say you have 1% Fe203 in the ore treated, which is a deleterious element, you also need to deal with the cumulative total of 7.5% F203 to get to a 0.8% F203 spec allowed in the spodumene chemical grade concentrate sold which comes at a cost and can impact your recovery rates.

Example 2:
Li20 ore grade 1.5% - you will need 5 tonnes of ore at a 80% recovery rate to produce 6% grade spodumene concentrate. Now if say you have 0.5% Fe203 in the ore, ou also need to deal with the cumulative total of 2.5% Fe203 to get to the allowable 0.8% F203 spec in chemical grade applications.

Clearly one is better off under example 2 than example 1 in terms of the ore they would like to have in their deposit. Moreso, the lower grade ore you have and higher deleterious elements means you might maximise your 'assumed profit' at possibly producing less than 6% grade spodumene concentrate as that is also where you can meet deleterious elements specs and have your best 'recovery' scenario.

2. Battery types and hydroxide:

The growing EV market requires a combination of all battery types, but range and energy density and km to recharge the key there is for NCM and NCA batteries and solid state batteries. If you are going to drive a car in the city for short trips then a car with a LFP battery will probably work best for you, longer range and need for higher speed well it will be another battery type. The graph below from benchmark shows what most are forecasting as battery types, but ultimately that can change as new technology emerges.
What Batteries Are Tesla Using In Its Electric Cars? (insideevs.com)

At the end of the day what makes hard rock competitive is battery type and the need for low impurities. Clearly hydroxide is the domain of hardrock, but even batteries that require carbonate can also be the domain of hard rock where those battery types will need low impurities. In terms of LFP they may remain to be the domain of brines, if that carbonate comes from Atacama IMO in particular - see below - IMO given those batteries are unlikely to need the level of 'good' lithium inputs - i.e. impurities don't have to be as strict as other battery types.

3. Direct Lithium Extraction (DLE) technology

On DLE, it is largely unproven technology IMO and is probably costlier than typical brine processes - with the difficulty in process is the fact that the 'input' is in varied concentrations, ranging from lithium to deleterious elements as it enters DLE and that is a problem in itself, although if they can ever get it to work at scale it would be a good thing (assuming they can further improve on the ESG aspects of the production technique in terms of returning water to the water table). Background is here - Post #:49764761

The embedded post has this image, i.e. at a time comparisons were between Atacama and hard rock, and whilst the numbers may be outdated the relativities remain:

Treating brines is a two step process to hydroxide, whilst hard rock it is a one step process. Point of the above is that I suspect, even if DLE is proven at scale which will take time btw, it will produce carbonate and hydroxide at a greater cost, where comparison is to brines using evaporation techniques of extraction, and hard rock

A good article on pro and cons of DLE is this one:
Lithium Extraction Startup Landscape, role of direct lithium extraction (DLE) in energy transition. | by Anil Achyuta | TDK Ventures | Medium

4. Can hard rock also serve the carbonate market:

Hard rock is preferred for hydroxide, but with the issues around Atacama and water, I would also say that hard rock can also compete with brines in the carbonate market as well.

What keeps brine costs down in the Atacama is the potash credits, and yes Atacama can produce carbonate at a slightly lower cost than hard rock. I also feel that other brine deposits will be more costlier to produce given their magnesium levels, noting Atacama has its issues with water, but impurities are lower than most other brines (particularly magnesium). Posted on issues around potash credits/ magnesium a while back in this post, ad why a lot of brine deposits outside Atacama are not great. - Post #: 44584547
So brines outside Atacama, i.e. those with high magnesium levels and deleterious elements, hard rock probably can certainly more than compete with them in the lithium carbonate space.

5. Why sulphate

Companies are now starting to look at sulphate as an intermediary option. This picture provides an understanding where Lithium Sulphate is produced -
refer https://www.nemaskalithium.com/en/whabouchi/proprietary-processes/:

The lithium sulphate 'solution' step is at the beginning of the process flowsheet. Here is info on this issue and how it relates to the above pic in converting the lithium sulphate solution to hydroxide- defined in this patenthttps://patents.google.com/patent/CN1486931A/en:
"In the production process of lithium hydroxide monohydrate, lithium sulfate solution and caustic soda are made to produce metathetic reaction to form mixture solution of sodium sulfate and lithium hydroxide, and sodium sulfate and lithium hydroxide monohydrate are then separated by means of the obvious difference in low temperature solubility. The production process includes the following steps: adding sodium hydroxide into lithium sulfate solution obtained through serial production steps to obtain mixture solution of sodium sulfate and lithium hydroxide; cooling to minus 10 deg.c to 5 deg.c for the crystallization and separation of sodium sulfate; heating to concentrate the separated clear liquid; crystallization and separation to obtain coarse lithium hydroxide monohydrate product; water dissolving coarse lithium hydroxide monohydrate, adding barium hydroxide to form insoluble barium sulfate, filtering, concentrating filtrate, crystallizing to separate wet lithium hydroxide monohydrate; and drying."

Here is another pic:

This patents below also explain how lithium sulphate is converted to hydroxide.
https://patents.google.com/patent/WO2013159194A1

I note that power requirements are a key in producing hydroxide and I presume sulphate requires a slightly lower, but probably only marginally lower power requirement than hydroxide given it is produced after the 'energy intensive' calcination process, albeit hydroxide prices are higher than sulphate prices because hydroxide is still a more intense process. Some reasons why a company may agree to produce lithium sulphate:

1. Producing lithium sulphate broadens the end markets that the product can be sold into, but to this end all I will say is that the specifications for both lithium carbonate and the more important lithium hydroxide are very tight as it relates to battery grade chemistries:
https://www.albemarle.com/storage/components/T401260.PDF
https://livent.com/wp-content/uploads/2018/09/QS-PDS-1021-r3.pdf

2. Opex cost/water savings (refer back to flowsheets above) between the two. Wouldn't think this would be a key reason though.

3. Lithium hydroxide itself has a short shelf life if not used and/or stored correctly because of the oxidisation impact on hydroxide. If the hydroxide is not appropriately sealed it will be impacted by oxidisation, and I note a number of the hydroxide plants are located near your gigafactories, meaning it converts effectively back to a form of lithium carbonate in theory. But don't think this is a reason as transport systems in WA are very good.
https://science.howstuffworks.com/carbon-dioxide-eliminated-aboard-spacecraft.htm

4. Capex savings - obviously a sulphate plant costs less than a hydroxide plant. I suspect you can probably retrofit a hydroxide solution to the plant in time to accord with the above mentioned process flowsheets for moving to say hydroxide later on.

5. Have avenues to better target a downstream converter (and potential EV producer) who intends having hydroxide facilities close to their gigafactories and wants to ensure that the hydroxide is on spec.

In other words, whilst lithium hydroxide monohydrate provides the returns, sulphate provides the options but lower returns, but your lithium sulphate would sell at least 50% of the hydroxide monohydrate price - infact in the DFS I read a while back (both in LTR and AVZ) they were pricing sulphate around that level anyway - 50%.

6. Breaking China's dominance

This picture says it all - the need to break China's dominance in the market is a key. Clearly the FIRB decision IMO around Alita has that in mind IMO. I'll let others decide whether a move on AVZ is around China seeking to maintain its dominance in the market or whether Manono is another Simandou where politics takes over economic development. Please all, this is not a discussion in this thread as AVZ is littered with this type of commentary in all the other threads - I like to keep this as a research thread. Breaking China's dominance in the market will be a good thing for all.

7. Some conversions:1. Lithium sulphate monohydrate has a Li content of 10.85% - or roughly requires around 4.3 tonnes of 6% grade spodumene at a 90% recovery rate -https://www.convertunits.com/molarmass/Li2SO4.H2O. Or in other words around 3.4 tonnes of spodumene feedstock if producing lithium sulphate monohydrate 80%.

2. Lithium sulphate per se has a Li content of 12.626%. (Or about 5 tonnes of 6% grade spodumene concentrate at a 90% recovery) -https://www.convertunits.com/molarmass/Li2SO4.

3. Lithium hydroxide monohydrate (LioH.H20) has a Li content of 16.5%, so need about 6.5 tonnes of 6% grade spodumene at a 90% recovery rate. This is generally the 'hydroxide' price quoted at 56.5%.

All IMO

Expand

Love your work

AVZ Price at posting: 78.0¢ Sentiment: None Disclosure: Held
4 Upvote

0 Great analysis

Reply

Top Stories

MKT

The ASX can overlook its Telecomm small-caps. Here’s one diversified brand with an international footprint

The Altcoin Landscape (Part 1): Key alternative cryptocurrencies to watch

'We're looking': Nickel-rich Indonesia sounds graphite warning to Aus producers

Finance school vs reality: What they don't teach you about the stock market

Making money: How many microcaps should be in an investor's portfolio?

There are more pages in this discussion • 24 more messages in this thread...

First 1567 Last

Add AVZ (ASX) to my watchlist