Divide the ppm by 10,000 is a quick way to convert to %.............
https://www.rapidtables.com/convert/number/PPM_to_Percent.html
So to have confirmed 5N (99.999%) total impurities present in your sample must be at or below 10ppm.
i.e 10ppm = 0.001%
100% - 0.001% = 99.999 % and so on
At impurity levels greater than 10ppm and you don't have 5N.....(for 6N you need total impurities to be at 1ppm or lower and so on).........
The FYI table states the following ppm levels for their sample:
Si (4.67ppm)
Cr (5.00ppm)
Mn (1.00ppm)
These three alone would 'push' impurities to over 10ppm..................am I missing something here.....?
Anyway it probably isn't that significant for ADN..........I do believe that we can and will (should JM decide to) confirm 5N at some stage.
- Forums
- ASX - By Stock
- ADN
- Ann: Dry Processing Trial Results - Table 1 information
Ann: Dry Processing Trial Results - Table 1 information, page-14
-
- There are more pages in this discussion • 22 more messages in this thread...
You’re viewing a single post only. To view the entire thread just sign in or Join Now (FREE)
Featured News
Add ADN (ASX) to my watchlist
(20min delay)
|
|||||
Last
0.8¢ |
Change
0.000(0.00%) |
Mkt cap ! $27.14M |
Open | High | Low | Value | Volume |
0.8¢ | 0.8¢ | 0.8¢ | $20.04K | 2.505M |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
74 | 31817997 | 0.7¢ |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
0.8¢ | 13674118 | 23 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
74 | 31817997 | 0.007 |
53 | 20032990 | 0.006 |
27 | 16530122 | 0.005 |
7 | 8025000 | 0.004 |
5 | 18933333 | 0.003 |
Price($) | Vol. | No. |
---|---|---|
0.008 | 13674118 | 23 |
0.009 | 14753752 | 12 |
0.010 | 6582677 | 8 |
0.011 | 14396522 | 8 |
0.012 | 13445921 | 6 |
Last trade - 11.07am 02/10/2024 (20 minute delay) ? |
Featured News
ADN (ASX) Chart |
The Watchlist
BM8
BATTERY AGE MINERALS LTD
Nigel Broomham, CEO
Nigel Broomham
CEO
Previous Video
Next Video
SPONSORED BY The Market Online