I can't find anything written about what efficiency means, but I'd assumed that it worked like this (because this is how factors normally would work):
(Normal uranium is about 0.7% enriched and to use it in a normal reactor you need to be about 3%-5% enriched, which is a target of about 800% enrichment).
A factor of 1 means that your process does nothing to the uranium (its still at 100% of its original enrichment). A factor of 1.01 (gaseous diffusion) means that to get to 800% you will need to run your process about 200 times (due to compound interest its not 700 times). I think that's what they call a cascade where the one plant does the gaseous diffusion stuff multiple times in a row. If you have a factor of 1.25 (centrifuge) then that's 25 times better than a 1.01 enrichment. With a 1.25 plant you need to run the process about 8 times to get to 800%. However even if we have a factor of 2 then we run the process 3 times (and obviously a factor of 8 or higher would mean we only run the process once).
It gets a little more complex because when you have run a few rounds of enrichment and are half way to your goal you have ended up with your enriched uranium, and some low % tails. You can start to ignore the tails and focus on only enriching the higher % uranium, which decreases your cost. Of course if uranium is expensive or your enrichment process has a high factor and is cheap then you can continue to use your tails for longer. Tails often have 0.2% rather than 0.7% in natural uranium, so that's light work for a process with efficiency of 3 or 4, but a lot of work for centrifuges.
Google won't give me anything better as supporting evidence though - the best I could find was https://en.wikipedia.org/wiki/Enriched_uranium, which says that "centrifuges are a factor of 20" [times more efficient than gaseous diffusion plants]. Which is consistent with the difference between 1.01 and 1.25 (remember compound interest).
Does anyone know for sure how this works?
- Forums
- ASX - By Stock
- SLX
- Ann: Silex AGM Presentation - 2017
Ann: Silex AGM Presentation - 2017, page-36
Featured News
Add SLX (ASX) to my watchlist
|
|||||
Last
$4.03 |
Change
0.005(0.12%) |
Mkt cap ! $959.3M |
Open | High | Low | Value | Volume |
$4.03 | $4.12 | $4.02 | $1.122M | 275.0K |
Buyers (Bids)
No. | Vol. | Price($) |
---|---|---|
22 | 2246 | $4.02 |
Sellers (Offers)
Price($) | Vol. | No. |
---|---|---|
$4.03 | 4743 | 27 |
View Market Depth
No. | Vol. | Price($) |
---|---|---|
22 | 3117 | 4.020 |
22 | 10590 | 4.010 |
14 | 12520 | 4.000 |
10 | 6519 | 3.990 |
11 | 39706 | 3.980 |
Price($) | Vol. | No. |
---|---|---|
4.030 | 5042 | 25 |
4.040 | 6703 | 27 |
4.050 | 7900 | 14 |
4.060 | 14479 | 14 |
4.070 | 8759 | 13 |
Last trade - 14.13pm 20/08/2024 (20 minute delay) ? |
Featured News
SLX (ASX) Chart |